Facebook Twitter LinkedIn YouTube Menu Search Arrow Right Arrow Left Arrow Down Arrow Up Home Arrow Next Arrow Previous RSS Icon Calendar Icon Warning Icon

EASA Accreditation Program Terms & Conditions

Should Accreditation be granted by an EASA-sanctioned third-party auditor, permission to use EASA’s Accreditation Marks, including specifically its logos and labels, exists solely for the accreditation period as defined by EASA. At the end of such accreditation period, if the accreditation is not renewed, the accreditation expires; all rights to use the Accreditation Marks terminate; and my company will immediately cease use of the Accreditation Marks. EASA may terminate any rights my company has in the use of the Accreditation Marks if my company fails to maintain current accreditation status as described below.

Accredited firms must adhere to the mandatory items on the “EASA Accreditation Checklist with Audit Criteria Explanations” current at the time of application or renewal.

Accredited repairs may only be performed and labeled at the accredited firm’s location except as noted below.

Outsourcing of some but not all repair activities is permitted, but the outsource vendor must provide documentation to confirm that repairs meet the requirements of this program. If outsourced repair requires measurements or testing, proof that calibrated equipment was used is also required. (For more information, see “Equipment” in the “EASA Accreditation Checklist with Audit Criteria Explanations.”)

Calibration

  • All required calibration records and certificates must be up-to-date to obtain accreditation. Annual calibration records must be retained for the three-year period until the next third-party audit.
  • Each piece of calibrated equipment must have a unique ID number.
  • Any non-calibrated equipment that is not used for accredited repair jobs must be labeled “For Reference Only” (i.e., not every piece of equipment necessarily needs to be calibrated).

Accreditation period (years 1, 2 and 3)

  • To be accredited, a service center must successfully complete an on-site audit by an EASA-sanctioned third-party auditor. It also must submit internal self-audits to the third-party auditor for approval by the accreditation anniversary date in years one and two. EASA Accreditation will be suspended if auditor-approved internal self-audits are not received by EASA within 60 days of the accreditation anniversary date, and cancelled altogether if they are not received within 8 months of the accreditation anniversary date. If accreditation is suspended, it will not be legal for a firm to display the EASA Accreditation Program logo in any way related to its location, including on company stationery, business cards, website, promotional items or any other literature, or to use the EASA Accredited Repair label on any repaired motor. Should EASA Accreditation be cancelled, it will be necessary to reapply, pay the $300 application fee ($1,500 for non-members), and undergo an on-site audit to be approved for accreditation. 
  • Payment of non-refundable renewal fee to EASA ($300 for members; $1,500 for non-members) and another third-party (on-site) audit are required after three years. 

Example:

  • October 15, 2014: On-site audit by EASA-sanctioned third-party auditor results in approval; Accreditation granted by EASA.
  • By October 15, 2015: Internal self-audit must be submitted to EASA-sanctioned third-party auditor for approval and then forwarded to EASA. (Accreditation will be suspended if the approved internal self-audit is not received by EASA within 60 days of the accreditation anniversary date.)
  • By October 15, 2016: Internal self-audit must be submitted to EASA-sanctioned third-party auditor for approval and then forwarded to EASA. (Accreditation will be suspended if the approved internal self-audit is not received by EASA within 60 days of the accreditation anniversary date.)
  • By October 15, 2017: On-site or remote audit required by EASA-sanctioned third-party auditor, who must submit documentation to EASA. (Accreditation will be suspended if approved documentation is not received by EASA within 60 days of the accreditation anniversary date.)

Click to enlarge the timeline

 

Use of EASA Accreditation Marks (logo and repair labels)

  • If Accreditation is approved by an EASA-sanctioned third-party auditor, the applicant may use EASA’s Accreditation Marks (logos and labels) for the accreditation period defined by EASA.
  • The Accreditation Logo is customized for each accredited service center with company name and location, and it will reflect EASA member or non-member status. Should this status change, a modified logo will be issued, after which use of the prior logo shall be prohibited. In addition, should an accredited member not renew membership, the appropriate balance of the $1,500 non-member fee will be invoiced. 
  • The Accreditation Labels reflect EASA member or non-member status. Should this status change, use of the invalid labels on hand shall be prohibited. In addition, the accredited service center will be responsible for purchasing replacement labels with the appropriate designation. 
  • Accredited firms must maintain a list of labeled motors with corresponding label and service center job numbers.
  • Accredited firms must follow EASA’s policies for the use Accreditation Marks (logos and labels), which strictly prohibit their use on corporate websites, in printed materials, or on collateral marketing materials in any way that may imply that unaccredited branch locations are EASA-Accredited Repair facilities (i.e., you can’t imply that all branches are accredited by placing the accreditation logo on a home page that also lists unaccredited locations).
  • Permission to use EASA’s Accreditation Marks (logos and labels) will expire at the end of the accreditation period unless accreditation is renewed, or in event of program default (failure to submit internal audits). In either event, the applicant shall immediately cease using EASA’s Accreditation Marks and stop referencing EASA accreditation.

EASA-sanctioned third-party auditors

  • EASA has qualified and makes available third-party auditors and will not serve as arbiter in any disputes between a service center and an auditor. EASA encourages applicants to interview prospective auditors to ensure they find a good fit.
  • Auditor agreements require them to keep all information obtained as part of any audit process proprietary and confidential. The applicant is responsible for obtaining agreement with the third-party auditor regarding any special requirements or stipulations.
  • EASA-sanctioned auditors are independent contractors and not a part of EASA; as such EASA accepts no liability and does not warrant any work by such contractors.
  • Auditor agreements require them to respond within 10 business days to client submissions of internal audits and upon successful completion of subsequent on-site renewal audits.

Exclusions

Excluded from the scope of the EASA Accreditation Program are specific requirements, certification, and inspection required for listed explosion proof, dust-ignition-proof, and other listed machines for hazardous locations.

Also excluded are specific or additional requirements for hermetic motors, hydrogen-cooled machines, submersible motors, traction motors, or Class 1E nuclear service motors. 

Indemnification and Disclaimer of Warranty

By submitting an Accreditation or Renewal Application, I understand that an EASA-sanctioned third-party auditor has the right to grant or reject my accreditation and I agree to indemnify and hold EASA, its officers, directors, employees, volunteers, and representatives (“Indemnitees”) harmless from any actions taken or omitted by Indemnities, except to the extent that such actions or omissions of the Indemnitees constitute willful misconduct or gross negligence. The use of EASA Accreditation Marks (logos and labels) is provided on an “as is” basis. Participation in the program and the use of the Accreditation Marks does not guarantee additional business. Furthermore, EASA disclaims any and all express or implied conditions, representations and warranties, including any implied warranty of merchantability, fitness for a particular purpose, course of dealing, usage of trade, employability or non-infringement, except to the extent these disclaimers are held to be legally invalid. EASA has no duty or obligation to register, renew or otherwise maintain any registration for the Accreditation Marks. EASA does not warrant that accredited repairs maintain the original efficiency and reliability of the motor.

Limitation of Liability

To the extent not prohibited by law, in no event will EASA be liable for any direct, indirect, special, consequential, incidental or punitive damages, including without limitation attorney’s fees, loss of business, revenue, profits or other economic advantage, however caused, regardless of the theory of liability, arising out of or related to the use or the inability to use any of EASA’s marks, including without limitation EASA’s third-party auditor actions in reviewing an application for accreditation, releasing information as permitted in EASA’s policy and the implementation of the forms of discipline, even if EASA has been advised of the possibility of such damages. In no event will EASA’s liability under this declaration and agreement, whether in contract, tort (including negligence and defamation) or otherwise, exceed the amount my company paid in application fees. Liabilities shall be limited and excluded, even if the remedy fails of its essential purpose.

Language/Terminology

  • Internal audit = audit conducted internally by the accredited company and approved by a third-party auditor.
  • Third-party audit = on-site audit conducted by auditing firm.