Javascript is required to view this map.

Sloan Electromechanical Service & Sales

Location

3520 Main St.
San Diego, CA, 92113
United States
Company Phone: 
619-239-5174
Company Fax: 
619-239-5086

www.sloanelectric.com

jgray@sloanelectric.com

EASA Region: 
7
EASA Chapter: 
Southern California Chapter
Join Date: 
October 27, 1949
Employees
Key contacts at this member company: 
  1. Jerry Gray
  2. Stephen Watson
Total number of employees: 
29
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC GENERATOR REWINDING 50 kW AND OVER
  • Brush shifting motors
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations
  • ISO 9000 Series registration.

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding

Specialty machine rewinding or rebuilding

  • Traction
  • Hermetic

Transformer servicing

  • Air-cooled rebuilding

Mechanical servicing

  • DYNAMIC BALANCING
  • General machine shop
  • Metal spraying
  • PUMP REPAIRING
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing
  • Switchgear 600 volts
  • Custom panel fabrication
  • General electrical contracting

Field service

  • VIBRATION ANALYSIS
  • Alignment
  • Laser alignment
  • Portable balancing

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Generators
  • Electric motor controls
  • Pumps

SERVICE CENTER FACILITIES

  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 6 - 7.99 ft (1.827 - 2.435 m)
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Epoxy
  • Dipping equipment : Less than 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 36 - 47 in (91- 120 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 5 - 9.9 tons (4,536 - 9,071 kg)
  • Area regularly serviced (radius from plant) : 100 - 199 miles (161 - 320 km)
  • Area devoted to service work : 10,000 - 14,999 sq. ft (930 - 1,393 sq. m)
This entry last updated in EASA database: 
October 7, 2011