|
EASA staff and volunteer committee members represent your interests on a variety of standards-making committees that affect our industry. Below is a list of organizations with EASA representation.
IEC | IEEE | CSA | MDM | NEMA | NFPA | UL | USDOE | Green Motors Practices Group
|
|
 |
International Electrotechnical Commission (IEC)
- Maintenance Team 60079-1 for IEC 60079-1, Electrical Apparatus for Explosive Gas Atmospheres
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- Working Group for Introduction of IEC 60079-19 into IEC Ex Scheme
John Allen
Sulzer Dowding & Mills
Technical Services Committee Member
- TC2 working group
Chuck Yung
EASA Senior Technical Support Specialist
- TC31 Management Committee for IEC 60079-19
John Allen
Sulzer Dowding & Mills
Technical Services Committee Member
- TC31 US TAG for IEC 60079, 61779, 62013 and 62086
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- 60034-8 Rotating Electrical Machines; Terminal Markings
Chuck Yung
EASA Senior Technical Support Specialist
- 60034-11 Rotating electrical machines – thermal protection
Chuck Yung
EASA Senior Technical Support Specialist
- 60034-17 Motors fed from converters
Chuck Yung
EASA Senior Technical Support Specialist
- 60035-2-34 Standards Technical Panel for Hermetic Refrigerant Motor-Compressors
Chuck Yung
EASA Senior Technical Support Specialist
- IEC 60034-27 Rotating electrical machines – Part 27: Partial discharge off-line measurements on the stator winding insulation of rotating machinery
Chuck Yung
EASA Senior Technical Support Specialist
|
|
|
|
IEEE Working Groups
- IEEE 43 Recommended Practice for Testing Insulation Resistance of Rotating Machinery
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 62.2 Guide for Diagnostic Field Testing of Electric Power Apparatus- Electrical Machinery
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 1068 Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical Industry
Chuck Yung
EASA Senior Technical Support Specialist
IEEE Standards Association—Standards Review and Ballot
- IEEE C37.13 Draft Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE C37.102 IEEE Guide for AC Generator Protection
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE C57.12.51 Draft Standard for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34500 Volts, Low-voltage 208Y/120 to 4160 Volts - General Requirements
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE C57.12.91 Draft Standard Test Code for Dry-Type Distribution and Power Transformers
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE C57.98 Draft Guide for Transformer Impulse Tests
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 56 Guide for Insulation Maintenance of Electric Machines (Combines IEEE 56 and IEEE 432)
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 112 Test Procedure for Polyphase Induction Motors and Generators
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 95 Recommended Practice for Insulation Testing of AC Electric Machinery with High Direct Voltage
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 1147 Guide for the Rehabilitation of Hydroelectric Plants
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- IEEE 1434 IEEE Guide to the Measurement of Partial Discharges in Rotating Machinery
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
IEEE PPIC DCS Subcommittee
- Drives & Control Systems
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
|
|
 |
Canadian Standards Association (CSA)
- C392 Committee
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
|
|
 |
Green Motors Practices Group
- Linda Raynes, EASA President and CEO
- Tom Bishop, P.E., EASA Senior Technical Support Specialist
|
|
 |
Motor Decisions Mattersm (MDM)
- Marketing & Industry Awareness Committee
Chair
- Linda Raynes, EASA President and CEO
|
|
 |
National Electrical Manufacturers Association (NEMA)
- ANSI C50 Rotating Machinery Committee
Chuck Yung
EASA Senior Technical Support Specialist
(Alternate: Tom Bishop, P.E., EASA Senior Technical Support Specialist)
- NEMA MW 1000
Chuck Yung
EASA Senior Technical Support Specialist
|
|
 |
National Fire Protection Association (NFPA)
- NFPA 70B Electrical Equipment Maintenance
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
|
|
 |
Underwriters Laboratories (UL) Standards Technical Panels
- 506 Low Voltage Transformers
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- 448 Standard for Pumps for Fire Protection Service
Chuck Yung
EASA Senior Technical Support Specialist
- 674 Electric Motors and Generators for Hazardous Locations
Chuck Yung
EASA Senior Technical Support Specialist
- 778 Standard for Motor-Operated Water Pumps
Chuck Yung
EASA Senior Technical Support Specialist
- 840 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
Chuck Yung
EASA Senior Technical Support Specialist
- 1004 Standard for Electric Motors (7 sub-categories)
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- 1434 Standard for Thermistor-Type Devices
Chuck Yung
EASA Senior Technical Support Specialist
- 1446 Systems of Insulating Materials
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- 1450 Standard for Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment
Chuck Yung
EASA Senior Technical Support Specialist
- 1562 Transformers, Distribution, Dry-Type over 600 volts
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
- 2111 Standard for Overheating Protection for Motors
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
|
|
 |
U.S. Department of Energy (USDOE)
- Energy Matters Editorial Board
Tom Bishop, P.E.
EASA Senior Technical Support Specialist
|
